Road design for a designs city-
led lighting project, is the most important, because a good road can greatly beautify the landscape of the city, and the main function can reduce a lot of traffic.
So in the process of LED street light road design should pay attention to what problem?
A, street lamp light source, light pole, the choice of lamps and lanterns in urban road, also, incidentally, with a view on the selection of lamps and lanterns is suitable for the lamp type, choose more beautiful but before that, should meet the relevant technical requirements.
In the past, usually in the design of urban roads, usually select tip steel bar as a street light pole, hot dip galvanized inside and outside surface coating, light pole wall thickness not less than 4 mm, so the light pole has stronger ability of bending.
On the street lamp light source selected will generally choose long service life, high luminous efficiency, fog permeability good LED lights, lamps and lanterns chooses cut or anti glare, half light, energy efficiency, high quality products, the degree of protection IP65 is generally selected, rectifier, capacitor trigger elements are installed in the lamp post.
Because the LED lamps and lanterns has many features: less power consumption, high luminous efficiency, safety and reliability, long service life, is conducive to environmental protection.
Second, the street lamp lights decorate the layout spacing mainly including street lamp, street lamp installation, the height of the street light and the brightness of lamps and lanterns.
Street lamp of reasonable arrangement to improve the led lighting effect plays a key role.
In comprehensive consideration of roads, road surface reflection characteristics at the same time, should give full play to the appliance of light distribution features, make the layout reasonable as far as possible.
In road design, the setting of the light pole need according to the width of urban roads, green barriers setting determines, generally USES the bilateral symmetry layout, unilateral plan, center symmetrical layout, bilateral asymmetric arrangement, etc.
In the urban road design of the past, thinking of lamps and lanterns maintenance car hoisting height, generally USES 8 ~ 12 m height of the light pole, cloth lamp spacing generally USES 30 ~ 35 m.
Lamps and lanterns of cantilever cantilever length shall not exceed the height of a quarter of lamps and lanterns.
Lamps and lanterns installation Angle control in 5 & deg;
~ 15度;
Range.
Road design is vital for city road, can not be vague, USES the advantages of LED lights is very obvious, therefore to the design of road or road reconstruction, had better choose LED street lamps, choose high quality LED lights factory to do!
FOSHAN MYLIGHT TECHNOLOGY CO., LTD. is fully committed to supplying high quality products and services.
You can get a of any specification from FOSHAN MYLIGHT TECHNOLOGY CO., LTD. as we have varied specifications to suit different indoor pendant lighting manufacturers needs and cater to a wide client base existing in both domestic and overseas market. please feel free to enquire us at Mylight Indoor Lighting.
FOSHAN MYLIGHT TECHNOLOGY CO., LTD.’s model also predicts (i) a positive effect of management on firm performance; (ii) a positive relationship between product market competition and average management quality (part of which stems from the larger covariance between management with firm size as competition strengthens); and (iii) a rise (fall) in the level (dispersion) of management with firm age.
Through our distribution and marketing competencies, FOSHAN MYLIGHT TECHNOLOGY CO., LTD. provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the led pendant lights company of choice.
